Last Updated on November 13, 2018
Cross-contamination from health threatening infectious microorganisms such as bacteria and virus continue even with strict adherence to disinfection procedures. Adopting Germicidal UV Air and Surface Disinfection Strategies can be taken to prevent this.
Since the 1950’s, germicidal ultraviolet lamps have been utilized for air and surface disinfection. These lamps emit ultraviolet energy at a line of 254 nanometers. This wavelength is in the region of maximum germicidal effectiveness and is highly lethal to virus, bacteria, and mold spores. Now there are products such as germicidal ultraviolet room air sanitizers, indirect air units, and air duct disinfection systems that can be utilized in occupied spaces.
Germicidal UV Room Air Disinfection
Germicidal ultraviolet room air sanitizers are available in a number of different configurations to adapt to any settings. Ultraviolet room air sanitizers can be mounted into the ceiling, on a wall, or are available for portable or mobile use. Air is drawn into the unit through a washable electrostatic particulate filter and then forced into an ultraviolet exposure chamber where it is irradiated by germicidal ultraviolet light. Purified air leaves the exposure chamber through the louvered exhaust. Units can be sized accordingly, depending on the size of the room and air changes per hour required by the application. For more information, visit our SANITAIRE® product page.
Shop SANITAIRE® models at BuyUltraviolet.com.
Germicidal UV Indirect Air Disinfection
Germicidal ultraviolet indirect air disinfection equipment purifies the upper air in occupied spaces in order to reduce the occupants’ risk associated with infectious airborne microbes. These fixtures are designed to project the ultraviolet rays across the upper room air, thereby destroying bacteria and virus that is carried into the ultraviolet field by convection currents of air circulation. It is an important requirement that these fixtures are utilized in rooms with a minimum height of 8 feet. For more information, visit our Hygeaire® product page.
Shop Hygeaire® models at BuyUltraviolet.com.
Germicidal UV Air Duct Disinfection
Germicidal ultraviolet air duct disinfection units can be utilized in HVAC equipment, either for treatment of the air stream or surfaces. With the proper system design and installation, the moving air can be disinfected. Typical results experience up to a 98% kill rate, which is essential for hospitals and laboratories.
Ultraviolet air duct fixtures are sized based on time and intensity: the time that the air or the surfaces are contacted with the ultraviolet and intensity of the fixtures to be utilized. Note that multiple fixtures may be required in some cases to increase the intensity and meet the required dosage. Installation of air duct disinfection fixtures is recommended to be perpendicular to the airflow. This method is most effective as the lamp rays will travel the full length of the duct, therefore increasing the exposure time and effectiveness of the fixtures(s). For more information, visit our AeroLogic® product page.
Shop AeroLogic® models at BuyUltraviolet.com.
Direct Germicidal UV Disinfection
In unoccupied spaces, germicidal ultraviolet direct disinfection fixtures can be mounted to irradiate surfaces and purify the air. Many styles, configurations, and designs and available. In addition, germicidal ultraviolet portable area sanitizers are available to purify the room air and exposed surfaces. A room as large as 1,000 square feet can be treated in less than an hour. For more information, view the models for our Sanidyne® Portable Area Sanitizers, SaniLIGHT® Germicidal Ultraviolet Irradiators, and Sani·Ray® Germicidal Ultraviolet Fixtures.
Germicidal ultraviolet is a unique and rapid method of disinfection – lethal to bacteria, virus, and other microorganisms. It has many advantages over other disinfection methods in that it is economical, safe, fast, and easy – with simple use and maintenance.
Shop our vast array of Ultraviolet Air & Surface Disinfection Systems and our extensive offering of Promate™ accessories and replacement parts.
Made in the USA of high quality stainless steel, the UV Air & Surface Disinfection Systems from Atlantic Ultraviolet Corporation® are constructed of the highest quality materials and utilize STER-L-RAY ® Germicidal Ultraviolet Lamps. Optional accessories as well as replacement parts are available, giving support and flexibility for virtually any application.
For more information on our Ultraviolet Air & Surface Disinfection units, visit our overview page, download the owner’s manuals from our PDF library, or check out our Ultraviolet Air Purifier Comparison Chart.
For more information on STER-L-RAY ® Germicidal Ultraviolet Lamps, visit Ultraviolet.com
Need help? Call Our UV Specialists at 1-631-273-0500, Monday – Friday 7am to 6pm EST
For more company or product info, visit Ultraviolet.com
To make purchase, visit BuyUltraviolet.com